To install a Spidot eSIM on a Samsung Galaxy, open Settings, tap Connections, then SIM manager, choose Add eSIM and scan the QR code from your email. It takes a few minutes and needs an internet connection.
What you need
- A Galaxy S20 or newer, or another Galaxy that supports eSIM
- A carrier-unlocked phone
- Wi-Fi or mobile data
- The QR code from your Spidot email
Steps
- STEP1
Open Settings and tap Connections.
- STEP2
Tap SIM manager. On some models it is called SIM card manager.
- STEP3
Tap Add eSIM.
- STEP4
Choose Scan QR code and scan the code from your Spidot email.
- STEP5
Confirm to add the eSIM and wait until it shows as active.
- STEP6
In SIM manager, keep your own SIM for calls and texts and choose the Spidot eSIM for Mobile data.
- STEP7
When you arrive, turn on Data roaming in Connections > Mobile networks.
If it does not work
The QR code will not scan
Turn up the brightness of the screen showing the code, or open the code on another device. You can also enter the details by hand.
Read the full guideThe eSIM is installed but there is no data
Check that the Spidot line is chosen for mobile data and that data roaming is on for that line.
Read the full guideI deleted my eSIM by mistake
A deleted eSIM usually cannot be scanned again. Contact us before you buy a new one.
Read the full guide